Page 2
Replacing RES-222/RES-440
Set point selection
Zero calibration
Alarm output / reset
Manual mode
RES-222
Selection by means of a 10-turn potentiometer with
a fine control knob.
RES-440
Selection with step 1 in the software menu. If the
controller is active, the set point is also indicated on
the display.
RES-222
Zero calibration by means of a 10-turn potentiometer
(the pointer of the indicating instrument must be set
to "Z").
RES-440
Automatic zero calibration (AUTOCAL) with step 7 in
the software menu.
RES-222
Indicated by means of a red ALARM LED on the
front panel. Reset by pressing the RESET key.
RES-440
Indicated on the display. The error is identified by a
numeric code (
ª
RES-440 documentation). Reset
by pressing the RESET key (
).
ENTER
HAND
RESET
RES-222
Selected by pressing the HAND key. The red ON
LED is lit continuously.
RES-440
Selected by pressing the HAND key (
) while the
main menu is displayed.
ENTER
HAND
RESET
