INSTALLATION PROCEDURE
The wall surface must be of suitable strength and construction.
1)
Measure the distance (X) between the keyhole slots on the back of the mirror.
Only FR60SW&FR60SG has the option to be hung either portrait or landscape,
measure distance (Y) to hang in landscape.
2)
Mark out the fixing screw positions on the wall using a pencil to the desired
height, ensuring they are spaced at distance (X) or (Y).
3)
Drill the marked out positions and fit the wall plugs accordingly. Fix the screw into
position, leaving a small amount of the screw head proud of the wall for hanging.
NOTE: The wall plugs supplied are only suitable for solid stone / brick walls. For
plasterboard walls use specialist wall plugs.
4) The next step is to make the electrical connection from the mirror to the mains
supply. Use the connection wire found at the rear of the mirror to make the
necessary connections in accordance with the current IEE regulations. A second
person will need to hold the mirror in place whilst electrical connections are made.
5)
The mirror should easily slide onto the fixing screws and secure into place.
NOTE: To secure the mirror further, a small amount of silicone sealant can be
applied to the side of the extrusions to prevent the mirror being accidently pulled
away from the wall.
To remove the mirror, the mirror should first be lifted and then pulled away from the
wall.
Mirror for illustrative purposes.
Please match your components
to the relevant diagram
1
Roper Rhodes Ltd, Brassmill Lane Trading Estate, Bath, BA1 3JF
Tel:01225 303 900 | Email: [email protected]
www.roperrhodes.co.uk
Turn Mirror ON/OFF
To turn the mirror on/off, slowly
wave your hand in front of the IR
sensor.
Change LED colour
1. When the mirror is OFF
2. Hold your hand in front of the IR
sensor to adjust the colour tempera-
ture.
3. Remove hand from IR sensor once
desired colour temperature is
achieved.
warm
cool
Change LED intensity
1. When the mirror is ON
2. Hold your hand in front of the IR
sensor to adjust its brightness.
3. Remove hand from IR sensor
once desired intensity is reached.
OPERATING INSTRUCTIONS
The Frame Mirror comes with LED lighting, which is controlled via an IR sensor
located on the front face of the product. The lighting can be controlled using the
gestures detailed below:
Hold hand
in position
Hold hand
in position
MIRROR PRODUCT INSTRUCTIONS
FRAME MIRRORS
FR60RW, FR60RG, FR60SW, FR60SG
FR80RW, FR80RG, FR120SW, FR120SG
-
Xmm
Distance
Xmm
Distance
Ymm
Distance
3
Mains Supply
Distance X
2
5
Wall Screws
Wall plugs
4
3
Mains Supply
Distance X
2
5
Wall Screws
Wall plugs
4
