ROPA KS 475, Перевод оригинального руководства по эксплуатации

Страница: 58 / 110

Operation
Support foot
6.3 Support foot
Illustrations show support foot with end
tow kit on KS 475
Illustrations show support foot with
crosswise driving device on KS 475
(1) Machine support foot in operating position
(2) Support foot safety pin with circlip
(3) Support foot guide pin with circlip
(4) Machine support foot park position
The machine is fitted with a mechanical support foot. It is designed for safe parking of
the machine.
Depending on the machine configuration, positioning of the support foot differs on the
machine for the end tow kit or for the crosswise driving device.
The support foot must be brought into the machine working position (
1 ) immedi-
ately after coupling the machine to the tractor. Only in this position will this part of the
machine have sufficient ground clearance. Always use the support foot safety pin with
circlip ( 2 ). The support foot guide pin with circlip ( 3 ) may not be adjusted when cou-
pling or uncoupling.
The machine must not be parked on the support foot (
4 ) until is has been secured
against rolling away.
58 / 110