ROOTS RootsScrub B4550C, Руководство пользователя

Страница: 11 / 22

11
RootsScrub B4550C
OPERATION BRUSH
Installation of brush
Brush Lifting
Ÿ
Pedal is used to lift and lower the brush.
Ÿ
For lowering, first press the pedal a little to outside
(unlock) and then allow it to move slowly upwards.
Ÿ
For lifting, press the pedal slowly downwards and
make it lock.
Pedal to
raise/lower
the brush
Brushes / Pads
The machine must be equipped with brushes from the
accessories kit, as required by the degree of dirtiness
and kind of ground.
Ÿ
Remove screw of the brush cover.
Ÿ
Fasten supplied brushes at the drive rollers at the
inside of the opposite cover.
Ÿ
Close brush cover such that the guiding rollers and
the brushes catch safely.
When mounting, check the safe catching
of rollers and brushes.
Before cleaning or maintaining the machine as
well as before replacing parts of it, turn the
machine off and disconnect the plug.
Ÿ
Tilt the debris tray towards machine side and pull it
out.
Ÿ
Now empty the tray by inverting it and shaking.
Ÿ
Clean the tray and place it back for further cleaning.
Debris Cleaning
Removal of brush
n o tio f r
c o
e
r
t
i a
D tion
When inserting the brushes for the next
operation, make sure to change position of the
brush such that one-sided brush wearing is
preluded.
Ÿ
Raise the brush head and set to its parking position.
Remove the screw at the idler end, open the cover
and pull the brushes towards the user.
Ÿ
Close the cover and retighten the screw.