ROOTS BT4545, Руководство пользователя, Страница: 20 / 24

20
RootsScrub BT Series
BATTERY & CHARGER INSTRUCTIONS
Safety Symbols
Before using the Machine
Battery charging procedure
T h e a b o v e i n s t r u c t i o n s h a v e b e e n
established for your safety and have to be
strictly observed.
Ÿ
Observe the instruction which must be
mounted clearly at the charging point!
Ÿ
No Smoking!
Ÿ
No naked lights, embers or sparks in the
vicinity, risk of fire and explosion!
Ÿ
Wear protective goggles and protective
clothing when working on the batteries!
Ÿ
Do not tilt the battery!
Ÿ
Only use certified hoisting and transport
equipment.
Ÿ
Keep children away from batteries.
Ÿ
Any splashes of acid in the eyes or on
the skin must be rinsed throughly with
plenty of clear pure water.
Ÿ
Then consult a doctor immediately!
Ÿ
Risk of fire explosion, avoid short
circuits!
Ÿ
Caution! Metal components in the
battery cells are always under voltage,
never place any foreign items or tools on
the battery!
Ÿ
Ensure the battery is in fully charged condition.
Ÿ
Check the battery electrolyte level, if required refill it.
- Drain both the tanks
- Move machine near charger location
- Switch Off Machine
- Tilt fresh tank.
- Connect charger to power supply.
Charge the batteries in a well ventilated area.
- Make sure to connect the charger to the specified
voltage and frequency.
- Ensure that the seat cover is completely open.
- Do not place any objects on the battery.
Ÿ
Electrolyte is highly corrosive!
Ÿ
Keep children away from batteries
Ÿ
Do not throw in garbage!
Traction Batteries (LA)
2. Discharging
Ventilation openings may not be covered or closed.
Electric connections (e.g-plugs) may be connected or
disconnected only when the machine is in off condition.
Discharge batteries must be recharged immediately
and may not remain in discharged condition. this also
applies to only partially discharged batteries.
The battery may only be connected up to the allocated
battery charger certified for the particular battery size, to
avoid overload on the electric current Maintenance Free
Batteries have low gassing properties but are not
completely free of gassing. The battery is to be
connected with the correct poles (plus to plus and minus
to minus) to the disconnected battery charger. The
battery charger should then be switched on.
1. Initial Checking
Check the battery to ensure that it is in perfect
mechanical condition. All screwed unions within the
circuit must be tightened to ensure reliable contacts.
Machine cables and charging cable are to be connected
to the correct poles of the battery otherwise battery and
charger can be damaged.