Roots & Branches JOHNNY APPLE PEELER VKP1010, Инструкция по эксплуатации

Страница: 6 / 12

6
Test alignment
Test alignment by pressing
down on the thumb lever.
While holding the thumb lever
down, move the driveshaft
forward and backward. Watch
the fork as it is passing
through the center of the
coring/slicing blade. Observe
carefully to make sure the fork
doesn’t touch the sides of the
coring blade.
*Misalignment of the coring/slicing blade is the most common
user mistake which will result in damage to the blade and
possibly the fork.
Adjust peeling blade
The peeling blade works best when adjusted to about 1/8 inch past
the head of the peeling arm. To adjust the peeling blade, loosen the
wing-nut 1/2 turn. The blade can be moved forward to remove more
peel, or backward to remove less peel. Firmly tighten the wing-nut
after the adjustment has been made. It may require a few tests and
further blade adjustment before you get the desired result.
*Use
caution when adjusting since the blade is sharp!
1/8”
Loosen Adjust Tighten