Motorised Blind Fitting
Guide (V.1)
Fitting Guide (V.1) |
1 of 6
Step 1
1.
Unbox all the components. Leave the Blind wrapped in the protective plastic for fitting later.
2.
Assemble the aluminium Blind frame. Please note side
A
of the frame is where the Blind motor will sit. (
This is the side
it will retract to when the Blind is fully opened).
3.
The 2 x Support Blocks provided will need to fitted first to the Motor side of the reveal (side
A
). To do this, measure
70mm across from the upstand and 30mm down from the top of the upstand. Mark the points and screw in the 2 x
Support Blocks to the OSB board as per the diagram below.
Please do this for side A only
.
•
This product and all its components must be fitted by a qualified professional.
•
Ensure the electrical power is off before fitting this product.
•
Ensure the product is securely fastened before releasing.
•
The power supply intended for this product is 12v.
•
This product is not intended for use by children.
•
Do not install it with small children or pets around.
•
Do not use this product externally or in wet / moist conditions.
•
It should be used only indoors in a dry suitable environment.
•
Keep the handset out of reach of children.
•
Never drop, knock, puncture or immerse the handset in liquid.
Safety Instructions: