Ronson RFP600 Series Скачать руководство пользователя

Страница: 12 / 32

When processing is complete,

turn the control dial to the ‘OFF’

position, switch off at the power

outlet and unplug from the

outlet. Wait until the disc has fully

stopped rotating before removing

the lid.

Carefully remove the assembled

disc holder.

Remove the foodstuffs from the

Food Processor bowl. Unlock the

bowl from the motor base to

remove foodstuffs if required.

10.

Clean the Food Processor bowl

and stainless steel disc as per

the Care, Cleaning and Storage

instruction on page 20.

NOTE:

If the ingredients stick to

the sides of the Food Processor

bowl during processing, turn

the control dial to the ‘OFF’

position, switch off at the power

outlet, ensure the blade has

fully stopped rotating before

removing the lid and then push

the food back onto the blades

using a plastic spatula to scrape

down the sides of the bowl.

Replace lid, turn power on at the

power outlet and recommence

processing.

NOTE:

Do not over fill the Food

Processor bowl past the 1200ml

(MAX) line for solids. Do not

process thin fluids such as water,

milk, stock, juice etc. in the Food

Processor bowl as this could

result in overflow. To reduce the

risk of overflow, always add drier

or thicker ingredients to the Food

Processor bowl prior to adding

fluids. For greater quantities of

liquids, the Blender jug should

be used.

NOTE:

The Blender Processor is

designed so that the motor will

not operate without the Food

Processor bowl and lid correctly

locked into position. In the

event that the appliance starts

without the lid correctly locked

into position, immediately

disconnect at the power outlet

and return to your local Ronson

Service Centre for examination.

Disassembling the Food

Processor Lid

With one hand holding the motor

base and the other on the feed

chute, turn the Food Processor lid

clockwise so that the ‘ ’ symbol

found on the lid is directly above the

‘

ALIGN

’ symbol found on the top of the

Food Processor bowl. Pull the Food

Processor lid away from the Food

Processor bowl to remove.

Assembly and Operation of Your Ronson

Blender Processor

continued

Содержание RFP600 Series

































Результаты поиска

Содержание RFP600 Series

Отзывы:

Похожие инструкции для RFP600 Series

Бренды по названию

Популярные бренды

Ronson RFP600 Series, Руководство пользователя

Результаты поиска

Содержание RFP600 Series

Отзывы:

Похожие инструкции для RFP600 Series

Бренды по названию

Популярные бренды