manualshive.com logo in svg

RONK VIGILANT VTS0400, Инструкция для владельца и по установке

Поделиться
Скачать
RONK VIGILANT VTS0400 Скачать руководство пользователя страница 6

6 

Ronk Vigilant

®

 Owner’s and Installation Manual

SAFETY

Important Safety Instructions

Read Manufacturer’s Instructions. 

SAVE THESE INSTRUCTIONS. 

• 

This manual contains important information that should be used 
during installation, maintenance and operation of this unit.

• 

Read all the instructions and safety symbols thoroughly before 
attempting to install, operate and/or service this equipment.

Safety Symbol Meanings

Symbol

Description

!

Safety Alert Symbol

Crush Hazard

Electrical Shock Hazard

!

This safety alert symbol appears with most safety 
statements. It means attention, become alert, your 
safety is involved! Please read and abide by the 
message that follows the safety alert symbol.

!

 DANGER

Indicates a hazardous situation which, if not avoided, will 
result in death or serious injury.

 

!

 WARNING

Indicates a hazardous situation which, if not avoided, could 
result in death or serious injury.

 

!

 CAUTION

Indicates a hazardous situation which, if not avoided, could 
result in minor or moderate injury.

 

NOTICE

Indicates a situation which can cause damage to the equipment, 
personal property and/or the environment, or cause the 
equipment to operate improperly.

OTE:

N

Indicates a procedure, practice or condition that should 
be followed in order for the generator to function in the 
manner intended.

The manufacturer of this product cannot reasonably anticipate 
every possible circumstance that might involve a hazard. The 
warnings in this manual and the tags and decals affixed to the 
unit are, therefore, not all-inclusive. If you use a procedure, work 
method or operating technique that the manufacturer does not 
specifically recommend, you must ensure that your method 
is safe for you and others. You must also make sure that the 
procedure, work method or operating technique that you choose 
does not render the equipment unsafe.

Содержание VIGILANT VTS0400

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды