background image

GASOLINE BRUSH CUTTER

4

NOTICE 

Indicates a situation that could result in damage to the product 

SAFETY RULES & PRECAUTIONS

Proper safety precautions must be observed. Like all power equipment 
this unit must be handled carefully. DO NOT EXPOSE YOURSELF 
OR OTHERS TO DANGER. Follow these general rules. Do not permit 
others to use this machine unless they are thoroughly responsible and 
have read, and understand the machine manual and are trained in its 
operation.
Always wear safety goggles or visor for eye protection. Dress properly, 
do not wear loose clothing or jewelry that could become caught in moving 
parts of the unit. Safe, sturdy, nonskid footwear should always be worn. 
Long hair should be tied back. It is recommended that legs and feet be 
covered to protect from flying debris during operation.
Use the anti-vibration (AV) glove.
Keep the AV system well maintained. An unbalanced blade or trimmer due 
to excess wear will increase cutting time and the vibrations transmitted 
to your hands. A machine with loose components or with damaged or 
worn AV buffers will also tend to have higher vibration levels. All the 
above mentioned precautions do not guarantee that you will not sustain 
white finger disease or carpal tunnel syndrome. Therefore, continual 
and regular users should monitor closely the condition of their hands 
fingers.
If any of the above symptoms appear, seek medical advice immediately.
- Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and 
any damage. Repair or replace as necessary before using the machine.
DO NOT USE any attachment with this power head other than the 
ones recommended by our company. Serious injury to the operator or 
bystanders could result as well as damage to the machine.
- The blade guard and front handle guard is very important to the 
machine. It must be screwed up on the machine before the initial use. 

Содержание 4554



























Отзывы: