Ronix 2703V, Руководство пользователя

Страница: 8 / 22

ROTARY HAMMER
8
DRILL SAFETY
- When using electric hammer chisel only use bits that are
configured with the correct slots for this chuck.
- BEFORE STARTING the operation, jog the chisel switch to
make sure the chisel bit does not wobble or vibrate.
- DO NOT USE fly cutters or multiple-part hole cutters, as they
can come apart or become unbalanced in use.
- MAKE SURE the spindle has come to a complete stop before
touching the chuck or attempting to change the chisel bit also
beware that the bit will be hot, let it cool down before changing
as it could burn and cause injury.
- ALWAYS MAKE SURE THE CHISEL OR CHISEL IS FIRMLY
SEATED IN THE Hex CHUCK before starting the job in hand.
SYMBOLS
Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of
these symbols will allow you to operate the tool better and safer.
V volts
A amperes
Hz hertz
W watt
Kw kilowatts
F farads
microfarads
l litres
Kg kilograms
bar bars