Ronix 2703V, Руководство пользователя

Страница: 16 / 22

ROTARY HAMMER
16
MAINTENANCE
.
OIL FEEDING
CAUTION:
Prior to oil feeding, always disconnect the plug from the power
supply receptacle. Since an oil chamber is built in this electric
hammer chisel, it can be used for approximately 20 days
without supplying lubrication oil, assuming that the chisel is
used continuously 3 – 4 hours daily.
Feed oil into the oil tank as described below before using the
hammer chisel.
1) When the chisel is held upright look through the oil gauge
window to see if oil is visible, if no oil shows oil must be installed
before operating.
If chisel is used without oil this could seriously damaged the
chisel and forfeit any warranty given.
2) Before feeding oil, use the provided wrench to remove the oil
gauge (4). Be careful not to lose the rubber packing attached
below the oil gauge.
3) Check the oil level once daily, confirming that oil is filled.
4) After feeding oil, securely clamp the oil gauge.
NOTE:
Oil for the electric hammer chisel is sold separately, use Shell
oil ROTELLA 40 (engine oil) or equivalent, this is sold at most
shops or filling stations anywhere.
.
MAINTENANCE AND INSPECTION
1) Inspecting the tool
When using dull tool bits this can cause motor malfunction and