manualshive.com logo in svg

Ronde & Schwarz R&S TSMA6B-BP, Начало работы

Поделиться
Скачать
Ronde & Schwarz R&S TSMA6B-BP Скачать руководство пользователя страница 5

Safety Information

R&S

®

TSMA6B-BP

5

Getting Started 4900.9060.02 ─ 01

1

 

Safety Information

The product documentation helps you use the R&S

 

TSMA6B-BP safely and effi-

ciently. Follow the instructions provided here and in the printed "Basic Safety
Instructions". Keep the product documentation nearby and offer it to other users.

Intended use

The R&S

 

TSMA6B-BP is intended for the development, production and verifica-

tion of electronic components and devices in industrial, administrative, and labo-
ratory environments. Use the R&S

 

TSMA6B-BP only for its designated purpose.

Observe the operating conditions and performance limits stated in the data sheet.

Where do I find safety information?

Safety information is part of the product documentation. It warns you about the
potential dangers and gives instructions how to prevent personal injuries or dam-
age caused by dangerous situations. Safety information is provided as follows:

●

The printed "Basic Safety Instructions" provide safety information in many lan-
guages and are delivered with the R&S

 

TSMA6B-BP.

●

Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.

Содержание R&S TSMA6B-BP






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды