Ronald 42212TNI, Руководство по установке

Страница: 61 / 68

61
No need to copy any license files because the new version incorporates all prior users,
which includes you.
Open OTDAU and complete the verification process either with an IP camera, if you
have one, or using the USB camera option.
MSDAU MOUNTING ON A VEHICLE
One issue may be that the 3-DOF magnetometer (compass) in the MSDAU would be
affected by the metal of the vehicle which would also shield it from fluctuating magnetic
anomalies.
Thus, I would suggest finding a way to mount it externally when in use. Note that the
wall plate is the same as the vertical plate portion of the System Mounting assembly
used for the camera tripod mount.
You could either: a) mount the plate horizontally on top of the truck (using wing nuts?),
b) Use the System mount (both plates) and the 5/8-11 tripod mount on the truck
(MSDAU vertical) or c) Your own L-brackets or plate to attach to the wall plate
CAMERA/RESOLUTION TRADEOFFS
A moving target may not be slow enough or hang around long enough to be able to
zoom to 32x. If you make that assumption, then you would save money using a 12x
zoom camera such as the 42212.
A higher resolution is good as well but the tradeoff there is that the higher the resolution
the more data must move from camera to computer which uses more CPU resources.
If your field of view is limited to less than a fixed camera, such as the N53AB52 with an
FOV of 98 degrees and max resolution of 2592x1944, then that may be good enough
and cost less.
See the various cameras offered in the UFODAP Shop and the comparison table found
there.
PC HARDWARE SELECTION