Rona CLM46NU, Руководство по эксплуатации

Страница: 21 / 28

A
OPERATING INSTRUCTIONS
21
Fig G
Fig H
2. GRASS BAG –ASSEMBLY (See Fig I)
1. Place the metal frame (a) inside the grass
bag.
2. Clip the plastic clips (b) over the metal
frame.
3. Make sure that the clips are fully secured to
the metal frame (a).
Fig I
3. FITTING THE GRASS BAG (See Fig J To
K)
Fig J
Fig K
Lift the safety flap with one hand, hold the
grass collection bag by the handle with the
other and locate the grass collection bag on
the hinge joint bar
Note: The motor must always be switched
off and the blade must have stopped rotating
before you put the assembled grass collection
bag in place.
MOWER OPERATION
Before you start to mow the lawn, check that
the blade is not blunt and that the fastening
elements are undamaged. In order to prevent
imbalance, replace blunt and/ or damaged
blade.
Always switch off the motor and pull out the
mains plug before starting such a check.
1. STARTING AND STOPPING (See L,M,N)
The blade continues to rotate for a few
seconds after the tool is switched off. Allow
the motor/blade to stop rotating before
switching “on” again. Do not rapidly switch off
and on.
STARTING:
1. Insert safety key into the housing of the
switch box. (See L)
2. Open the switch lever and pull it towards
the handle. (See M,N)