- 3 -
DIMENSIONS:
TECHNICAL SPECIFICATIONS
Model#
EA1207
Rated Voltage
AC 120V, 60Hz
Rated Power (Total)
1350W
Flame Power
50W
Motor Power
20W
Light bulbs
2 pcs E12
INSTALLATION
NOTE
: A 15 amp, 120 Volt circuit is required to power this heater. A dedicated circuit is preferred but not essential in
all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips or the fuse blows on a
regular basis when the heater is operating. Additional appliances on the same circuit may exceed the current rating
of the circuit breaker.
WARNING
:
1. Ensure the power cord is not pinched or placed against a sharp edge. Ensure that the power cord is stored
or secured to avoid tripping or snagging to reduce the risk of fire, electric shock and personal injury.
2. Construction and electrical outlet wiring must comply with local building codes and other applicable
regulations to reduce the risk of fire, electric shock and personal injury.
3. Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or personal
injury, always hire a licensed electrician.
