Plugging in the heater
Note:
1)This heater is for use on 120 Volts.
2)A 15AMP circuit is required to operate this appliance.
If the breaker trips when the appliance is running, you
may need to move the appliance to another location or
unplug other appliances that are on the same circuit.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Using the Control Panel:
Using the Control Panel:
Using the Control Panel:
Using the Control Panel:
Master Power Switch (A)
．
．
．
．Open the cover and push button A down (I) to “On”position. (see FIG A)
Flame Effect:
Flame Effect:
Flame Effect:
Flame Effect:
．
．
．
．Push “O/I” (On/Off)button (B) or “O/I”(On/Off)button (M)on the remote control to begin flame effect. The red
power light “ ” and dimmer light “ ”will automatically come on.
．
．
．
．The flame effect can be adjusted by pressing the dimmer “ ” button (C) or dimmer “ ” Button (L) on the
remote control. When pressed, the red light will blink and the flame effect will cycle from high to low. Press
the dimmer “ ” button (C) or dimmer “ ” button(L) on the remote control again to lock in desired flame
brightness. The red light “ ” will remain on.This brightness will be kept until the dimmer “ ” button © or
dimmer “ ” button (L) on the remote control is pressed again.
Heat setting:
Heat setting:
Heat setting:
Heat setting:
．
．
．
．Turning on Master Power Switch (A) and “O/I”(On/Off) button (B) or “O/I”buttom (M) on
the remote control.
．
．
．
．Press “650W” button (D) or “ ”button (K) on the remote control to active the low heater setting. The
red light above will indicate that the heater is functioning.
．
．
．
．Press “650W” button (D) or “ ” button (K) on the remote control again to shut off the heater.
．
．
．
．Press “1300W” button (E) or “
” button (J) on the remote to active the high heater setting.The red lights above
“650W” and “1300W” buttons will indicate that the heater is functioning on high.
．
．
．
．Press “1300W” button (E) or “
” button (J) on the remote control again to shut off the heater.
Note
Note
Note
Note
When the heater begins to work, it will give off cool air for about 10 seconds before the
heating function is activated.
