Step 2: Remove the front glass,then use 2 screws (#5 ) to fix the bracket(#2) at the bottom of insert as shown in
Figure 3 .Then hang the insert onto the wall bracket (#1) and use 2 screws (#4) to fasten the bracket(#2) on the
wall as shown in Figure 4 .
Step 3: Place the pebbles(#6) on the front of PP plastic board as shown in Figure 5 .Then assemble the front glass
by locking the left hanging plate(#7) and right hanging plate(#8) as shown in Figure 6. Then remove the protective
covering on glass surface.
Note:left hanging plate and right hanging plate have been installed on the front glass before shipment.
