Rona 20035062, Руководство оператора

Страница: 8 / 9

ASSEMBLY INSTRUCTIONS
3
CARE AND MAINTENANCE
Glass: Wash and clean regularly using a non-abrasive neutral (pH balanced) glass cleaner. Light
scratches can be taken out by using a mild abrasive product. Rinse surface thoroughly afterward.
All spills should be cleaned immediately. Do not allow acidic substances, such as vinegar, to rest
on the glass surface as it will permanently cause a cloudy appearance. Avoid contact with oils,
petroleum-based or caustic products.
Cabinet: Wipe dust frequently with a clean, soft, dry, lint-free cloth. Use only polishes that contain
detergents, emulsifiers and mineral oil. Avoid using silicone cleaners and waxes. Clean up excess
water and spills immediately. Water left over a long period of time will cause white spots in the
finish.
4
Image A
S
8
helf adjustment
:
Shelf is held in place with screwed-in brackets.
To raise or lower shelf, unscrew brackets from
side panel and screw in desired location. Place
shelf on brackets.
4
.
D
3
.
Hinge adjustment instructions
:
The gap between doors can be changed by
making adjustments to the hinges with a Phillips
screwdriver. To decrease the gap turn the
adjustable screw clockwise. To increase the gap
turn the adjustable screws counter clockwise.
-
rawer djustment instructions
:
In order to remove the drawer, press the white
plastic parts to make them open and in the same
time, pull out the drawer completely as in Image A.
To place the drawer back on glides, make sure
both hooks are roperly inserted in the groove
Then push the drawer completely in. There will b
tick” sound.
a
. p
e
a “
Image B