Mode d’emploi
QUATTRO BOOST MONOBROSSE 94450
COMPLIANCE WITH PROTECTIVE MEASURES AND DANGER SIGNALS
Danger:
Do not use the machine unless it is properly assembled; not doing so could cause personal injury
and/or damage to property. Ensure that all locking parts are firmly in place. Ensure that machine is set up in
accordance with the specifications.
Danger:
Any use of the sander without guards and housings fitted and locked in place could cause personal
injury and/or damage to property. Always ensure that all guards and housings are in place and properly
secure.
Danger:
Sanding wood floors can create an explosive environment. Cigarettes, cigars, pipes, lighters, pilot
lights and any other source of fire could cause an explosion, if lit during sanding work. Sources of ignition
should be kept well away from the work area.
Danger:
Poorly ventilated work areas could cause an explosive environment if there are combustible
materials in the atmosphere, such as solvents, thinners, alcohol, fuels, some paints, wood dust or any other
combustible material. Floor sanders can cause combustible materials and vapours to ignite. Read the
manufacturer's instructions for any chemicals used, in order to determine whether or not they are
combustible. Ensure that the work area is always well ventilated.
Danger:
Nails encountered during sanding can cause sparks. Always remove all nails before sanding
surfaces.
Danger:
If the breaker on the power circuit trips several times or if it is under-rated, there is a risk of death
from electrocution. Have fuses, the protection circuit or the mains checked by a qualified electrician or by
Romus after-sales.
Danger:
Any maintenance and/or repairs made to a machine that is not properly disconnected from the
mains could cause death by electrocution. Disconnect from the mains before carrying out any maintenance
and/or repair operation.
Danger:
Use of this machine on an unearthed circuit cold cause death by electrocution. Never disconnect or
render the earth cable ineffective. If there is no earth wire or if you have doubts about the correct earthing
of the circuit, contact an electrician.
Danger:
Do not use this machine if its mains cable is damaged or you could cause an electrical discharge. Do
not use this machine if its mains cable is damaged. Do not pull on the electrical cable to move the machine.
Danger:
Risk of personal injury or death by execution if the sander passes over a mains cable and damages
it. Keep the cable away from the lower part of the machine to prevent any contact with the abrasive. Always
hold the mains cable above the machine.
Danger:
The moving parts in this machine could cause serious personal injury. Keep your hands, feet and
loose parts of your clothing away from moving parts on the machine.
Danger:
Failure to disconnect the machine from the mains before carrying out maintenance or replacing the
transparent plastic bag or filter bag could cause personal injury to the operator or anyone nearby.
Warning:
Read and follow all the instructions on the machine or in this manual; failure to do so could cause
serious personal injury or damage to property. Read and follow all safety instructions. Ensure that all plates,
stickers, warnings, precautions and instructions are fixed to the machine.
Caution:
Do not allow repairs to be made by unqualified persons, since this could result in personal injury or
damage to property.
Caution:
The machine could be damaged by storing it in a damp building. Store the machine in a dry
building.
