Mode d’emploi
QUATTRO BOOST MONOBROSSE 94450
Danger:
means
Serious injury or death of the operator or someone else if the hazard
warnings on the machine or in the manual are ignored or not followed. Read and follow all the DANGER
warnings on the machine or in this manual.
Warning:
means
Injury to the operator or someone else if the WARNINGS on the machine
or in this manual are ignored or not followed. Read and follow all the WARNINGS on the machine and in
the manual.
Caution
means
An injury that could affect the operator or someone else if the CAUTION
notices on the machine or in the manual are ignored or not observed. Read and observe all CAUTION
notices on the machine and in the manual.
GENERAL
INFORMATION ABOUT THESE USER INSTRUCTIONS
The user manual is an important source of information and a reference work for personnel when
setting up and using the equipment. It allows work to be carried out safely and in accordance with the
equipment's capabilities.
The prerequisite for that is knowledge of the safety aspects to observe when setting up, using and
maintaining the equipment. Consequently, when reading the user manual, you should start with the
chapter on "Safety". The other main points for information to personnel are the chapters which follow.
To avoid handling errors, this instruction manual should be kept close to the equipment and be
accessible to personnel at all times. Accident prevention instructions and general safety information
MUST be followed when using the equipment.
Note: Diagrams of the equipment appearing in these use instructions may differ slightly from the model
supplied.
LIABILITY AND WARRANTY
Any claim must include details on the use of the item and the date of purchase. For machines, the
warranty covers parts and labour after return to Romus.
Liability is limited only to the goods supplied by Romus and does not apply to any damage, injuries or
loss of income caused by a defective component.
The use of goods supplied by Romus must comply with the manufacturer's technical recommendations.
All our products have a traceable source of supply. It is the customer's responsibility to ensure that this
condition meets the requirements of the final destination of the goods purchased.
Goods sold are warranted free of any operating defect due to a material, manufacturing or design faults
for a period of one year from the date of invoice, subject to the customer using the product in the
prescribed way.
The warranty therefore does not apply if the product is modified, if there is negligent use or a
maintenance failure by the customer.
Products returned under warranty will be quality controlled before any decision is taken.
Representations in texts and drawings do not necessarily correspond to the item delivered. Drawings
and figures are not to a 1:1 scale.
This instruction manual should be read carefully before use.
Passing this instruction manual to a third party is prohibited. Compensation may be demanded in the
event of failure to comply with this clause.
