11
HOT AIR CANNON « K-37 » - DIesel
Ref 93444
43
Air intake filter
After a maximum of 500 operational hours, wash
in a mild, soapy solution and dry thoroughly or
replace. Do so more often if used in dusty
environments!
Remove the screws from the sides of the
heater
Lift the upper cover
Remove the fan grille
Wash/dry or replace the air inlet filter
Replace the grille and cover in their usual
positions.
Air intake filter/lint filter
Replace after a maximum of 500 operational
hours or once a year if used in a dusty
environment.
Remover upper cover and fan grille
Remove the screws and the filter cover
Remove the filter cover
Replace the air inlet filter and lint filter
Replace filter cover, fan grille and upper
cover in their usual positions.
Fan blades
Clean at least once a season or whenever necessary.
Remove upper cover
Use an Allen key to remove the
screws that secure the fan blades to
the engine axle
Slide the fan off the motor axle
Clean the fan with a soft cloth, slightly
moistened with a gentle soapy
solution. Be careful not to move the
blades out of position!
Let the fan dry thoroughly
Secure the fan to the motor axle
Place the outlet from the hub on the
end of the motor axle
Secure the screws that hold the fan blades on the motor axle.
Secure the screws tightly (4.5-5.6 Nm)
Put the upper cover back in position.