Romstal PWSRW030B-GL, Руководство по установке

Страница: 22 / 24

21 20
1. The unit can only be repaired by qualified installer centre personnel or an authorised
dealer.
（
for Europe market
）
2. This appliance is not intended for use by persons (including children) with reduced physical
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
（
for Europe market
）
Children should be supervised to ensure that they do not play with the appliance.
3. Please make sure that the unit and power connection have good earthing, otherwise may
cause electrical shock.
4. If the supply cord is damaged, it must be replaced by the manufacturer or our service agent
or similarly qualified person in order to avoid a hazard.
5. Directive 2002/96/EC (WEEE):
The symbol depicting a crossed-out waste bin that is underneath the appliance indicates
that this product, at the end of its useful life, must be handled separately from domestic
waste, must be taken to a recycling centre for electric and electronic devices or handed
back to the dealer when purchasing an equivalent appliance.
6. Directive 2002/95/EC (RoHs): This product is compliant with directive 2002/95/EC (RoHs)
concerning restrictions for the use of harmful substances in electric and electronic devices.
7. The unit CANNOT be installed near the flammable gas. Once there is any leakage of the gas
, fire can be occur.
8. Make sure that there is circuit breaker for the unit, lack of circuit breaker can lead to
electrical shock or fire.
9. The heat pump located inside the unit is equipped with an over-load protection system. It
does not allow for the unit to start for at least 3 minutes from a previous stoppage.
10. The unit can only be repaired by the qualified personnel of an installer center or an
authorized dealer.
（
for North America market
）
11. Installation must be performed in accordance with the NEC/CEC by authorized person only.
（
for North America market
）
12. USE SUPPLY WIRES SUITABLE FOR 75
℃
.
13. Caution: Single wall heat exchanger, not suitable for potable water connection.
（
1
）
Caution & Warning
8-Appendix 8-Appendix
(2) Cable specification
13~25A
25~30A
30~40A
40~55A
55~70A
Phase line
2
2 × 1.5mm
2 2 × 4mm
2 2 × 6mm
2
2 × 10mm
2
2 × 16mm
2
2 × 25mm
2
1.5mm
2 4mm
2
6mm
2
10mm
2 16mm
2
25mm
MCB
20A
40A
40A
63A
80A
100A
Creepage protector
30mA less than 0.1 sec
Signal line
2
×
n 0.5mm
Nameplate
maximum
current
Earth line
No more
than 13A
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
13~25A
25~30A
30~40A
40~55A
55~70A
Phase line
2
3 × 1.5mm
2 3 × 4mm
2 3 × 6mm
2
3 × 10mm
2
3 × 16mm
2
3 × 25mm
2
1.5mm
2 4mm
2 6mm
2
10mm
MCB
20A
40A
40A
63A
80A
100A
Creepage protector Signal line
2
×
n 0.5mm
Nameplate
maximum
current
Earth line
No more
than 13A
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
30mA less than 0.1 sec
2
1.5mm
2
4mm
2
4mm
2
4mm
2
4mm
2
4mm
Neutral line
1. Single phase unit
2. Three phase unit
When the unit will be installed at outdoor, please use the cable which can against UV.
2
16mm
2
25mm