25
Safety
Installation
Panel must be installed indoors. Do not install the panel where it
may be subject to excessive heat or moisture as this may damage
the product or reduce the product’s lifespan.
Ensure any packaging is disposed of correctly. Plastic bags can be a
suffocation risk.
Ensure the panel is mounted by a competent or qualified person.
Improper mounting could result in injury. Care should be taken to
type of wall you are mounting the panel to and the appropriate
fixings which should be used.
Consider the height you are mounting the panel. The age of the
primary user and whether they should be seated or standing should
dictate the height the panel is mounted.
Operation
Panel must always be supervised during use.
Do not strike the panel. The panel is built robustly but intentional
misuse will shorten the product’s lifespan.
Do not open or attempt repair of the panel yourself as this may
cause injury and invalidate warranty.
Disconnect any cables when installing or moving the product.
Pulling of the cables can cause premature wear or damage to the
product and/ or accessories.
If the product generates abnormal sounds, burning smell or smoke
disconnect immediately and contact Rompa® customer services.
Do not press and hold the panel push buttons for durations of
longer than a minute. Over time this may reduce the life expectancy
of the product.
