13.
Installation
Please refer to the instructions included with the individual products
Before you proceed any further, take a few moments to remove one key from
each key ring (2 sets of 2 keys included) and label the keys you have removed –
we recommend you attach a coloured ribbon to each of these with a strong label
on or write on the ribbon in marker pen to identify these. For example, write
‘SenStation’ on the label or on the ribbon so that if you should ever lose these,
you can identify them easily. As a further failsafe, write on an adhesive label
where the spares can be located and stick this label to the top of the Snoezelen®
SenStation™ or on the power cable – anywhere out of immediate view but where
it can be seen when looked for.
Keep the keys in a safe place and make a note for all users where this is.
You could keep one key from each ring in each lock, but this is not recommended
as removal of the keys will prevent any unwanted access to the interior of the
SenStation™.
1.
This product is supplier ready assembled, with the exception of the projector. On
receipt it will need to be carefully taken out of the crate (two
people will be required) and placed on a flat, stable floor.
2.
Unpack the projector from its box. The base plate for the
projector will be already attached to the top of the
Snoezelen® SenStation. Attach the projector bracket to this
plate. Connect the power lead by the plate to the socket at
the back of the projector.
3.
Remove the protective film from the mirror behind the
Waterless Rainbow Tube.
4.
Plug in any additional products into any unused sockets inside the Snoezelen®
SenStation™ as necessary. Access to the interior of the SenStation™ is:
-
or by removing one of the wall panels
-
or by removing the drawers above the Interactive Aroma Panel
-
via the locked doors
