14.
Care and Maintenance
Regularly change the water and use a suitable water cleansing agent (e.g. BCB Fluid)
The environment the Bubble Tube is in will affect how often the water needs to be
changed. Bubble tubes in dark, damp environments with minimal ventilation will need
changing at a different frequency to those in bright, well-ventilated rooms. Changing the
water monthly is a good starting guideline. Plan for holidays. For example, if the bubble
tube will be switched off for long periods, empty the water out. You do not want to return
from a long holiday to find the water is green and unpleasant!
If the tube is used in an area where lime-scale in water is a problem, it may be advisable
to use an appropriate water softener
Failure to cleanse your bubble tube water and/or use an appropriate water softener can
block the valves of the bubble tube and so encourage product failure.
Do not add bleach, coloured dyes or salt to the water
Once this product is eventually exhausted, please dispose of it appropriately and responsibly.
Do not turn the bubble tube upside down as this could dislodge the air stone. If the
bubble tube is noisy, it is probable that the air stone has become dislodged.
TO EMPTY THE RELAXER BUBBLE TUBE
Use an appropriate pump. Remove the cap (round lid at the top of the tube) and remove
the water from the top of the tube using your pump. A pump is available separately from
ROMPA
®
: code 20601. Alternatively, very carefully lift the tube up and pour the water away
into an appropriate place, making sure that the tube is not turned upside down.
Bubble Tube Filling Pump 20908 is not compatible with the Relaxer Bubble Tube.
GENERAL CARE
Wash the exterior of the Bubble Tube with a slightly soapy cloth. Wipe excess soap
away with a damp cloth. NOTE: Never use solvent based cleaning products, methylated
spirits, alcohol wipes or liquid detergents to clean the Bubble Tube.
15.
Troubleshooting
In the unlikely event of product failure, please check the following:
Problem: No lights, no bubbles
• Check that the bubble tube is plugged in at the wall
• Check that the green ON light is illuminted
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
RELAXER BUBBLE TUBE 19120, September 2019
Copyright ROMPA® Ltd