13.
Installation
This Panel may be affixed to a wall or used in a Porter 18518/18522 – see ROMPA
®
catalogue/website for further information.
1.
Choose a safe and suitable indoor location for your panel. The panel is ONLY to be
used in dry environments.
2.
No fixings are included in this product for the wall. When fixing it to the wall please
consult a suitably qualified professional builder or someone from an estates
department to understand the construction of the wall the panel is to be fixed to, so
that the correct fittings can be used.
3.
Attach fixings such as mirror plates to the back of the panel. Check the fixings e.g.
mirror plates you buy can easily support 23kg. You may wish to attach two mirror
plates to the back of the panel at the top and two on the back at the bottom. When
attaching fixings to the back of the panel please proceed with caution – be aware
that there are electrical assemblies inside the panel.
Note: A short screw (no longer than 20mm) can be used in the safe fixing areas.
4.
Alternatively, this Panel may be used in a Porter 18518/18522 – see ROMPA
®
catalogue/website for further information.