Copyright ROMPA® Ltd
HYDROFIT 19957, KH 2.10
INSTALLATION
Install the Hydrofit bearing in mind the following:
•
The Hydrofit unit must be kept dry and away from water at all times
•
Do not use or assemble the unit next to or under a radiator.
•
Do not place the product on or under clothing, towels etc (to avoid the danger of
overheating)
•
The Hydrofit unit can be placed on a table etc provided that it is at least 60cm away
from the bath and outside the area marked below:
•
The Hydrofit unit must be at least 30cm off the floor (see below). The air inlet on the
underside must not be covered.
•
Place a 3V CR2032 type battery into the Remote Controller. Turn the Remote
Controller over so its back is uppermost. Use a coin to open the Remote Controller.
Insert the battery and close by turning the coin again.
