OPERATING INSTRUCTIONS
When pressure is applied to a ‘button’ the corresponding colour will be activated on the receiving
ROMPA® product(s). Pressure is required – the colour choice cannot be activated by a light touch
nor by proximity alone. For best results, press the centre of the ‘button’.
The selected colour will remain activated in the receiving ROMPA® product until a new
colour is selected. Should another ‘button’ not be pressed, after one minute, the colour of
the ROMPA® product will revert to its automatic cycle – the light will scroll through a
sequence of colours. In other words, the ‘buttons’ have a latched operation – the colour
stays on for one minute unless another ‘button’ is activated.
14.
Care and Maintenance
Fabric Care
Always supervise the use of the product.
Organise a regular cleaning schedule.
Vinyl will crack, tear and rub off if subjected to sharp objects or continual rubbing by hard
objects. Remove shoes, and avoid buckles, zips or sharp/hard/pointed objects coming into
contact with the surface.
Check seams regularly to ensure that these are not worn or split and the interior filling
cannot be accessed.
Wipe off accidental marks/liquids at the time they occur or are noticed.
Avoid eating and drinking whilst using these products.
Do not place near sources of heat or fire that may damage the surface (radiators, fires,
underfloor heating, hot central heating pipes etc.)
Direct contact with bright sunlight may affect material over time.
Do not saturate the material with lots of water.
Some of our products contain zips for manufacturing purposes only. Do not attempt to open
these or to access the interior part of these products. Never allow children or vulnerable
people to access the interior part of this product.
PVC (Vinyl)
Use a soft brush remove all loose dust/dirt. Clean with a mild detergent (such as Lux
soap flakes in luke-warm solution) applied to a sponge or damp cloth.
This may be sanitised using a weak solution of Milton fluid.
Do not use excessive amounts of water and always ensure the PVC is dry after cleaning.
Do not use an abrasive cleaning pad.
Do not use boiling/very hot water, washing up liquid / aggressive detergent or solvent based
cleaner as this will cause the coating to discolour and go hard. Steam cleaning is not advised.
