Rompa 22126 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 11

Rompa 22126 Скачать руководство пользователя страница 11

15. Troubleshooting

Problem: The Clip On Prism (or other accessory) will not fit on the front lens of the projector
• Check that the ‘click-clack’ has not been removed. This is a cylindrical piece that sits inside
the lens (shown below). Check that this is not still attached to the accessory that has
previously been removed from the projector. Reattach this part to fit an accessory onto the
front lens in order to attach an accessory.

Should you need to contact us about this product, please have the serial number to hand.

This can be located as indicated below:

Problem: My Wheel Rotator has a cable with 2 pins – where does this connect?
• Older Wheel Rotators are no longer compatible with this Projector. Please purchase a
Wireless Wheel Rotator (preferably 22614 – wireless and magnetic version) and Effect
Wheels compatible with your Wheel Rotator

In the unlikely event of product failure, please contact us.

Further copies of these instructions can be downloaded at www.rompa.com

We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at

[email protected]

LED PROJECTOR FOR WATER ENVIRONMENTS 22126, May 2019

Copyright ROMPA® Ltd

«
...
9
10
11

Содержание 22126












Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды