Rompa 22126, Руководство пользователя

Страница: 8 / 11

Focus the projected image by twisting the lens in and out until the desired focus is achieved.
During focusing beware of rotating the projection lens too far out as this can cause the lens
to separate from the projector and may drop and break or cause injury.
Projector use with external switches
The use of external switches is unadvisable in a wet environment – this feature is best suited
to use in dry environments when the projector is being used on a table top

Use a switch with a 3.5mm mono or stereo jack plug (a mono plug has one black ring
around the plug; a stereo one has two). An adapter that converts 6.35mm to 3.5mm
could be used if your switch has a larger 6.35mm end.

Connect your switch to the appropriate jack socket – MOTOR or LIGHT. Choose
MOTOR if you wish to stop the rotation of the effect with the switch being activated.
Choose LIGHT if you wish to switch the light off with the switch being activated.

Flock the toggle switch to the function required: