12.
Technical Specification
Child
Maximum weight supported: 80kg
Size: 50cm internal diameter; 85cm external diameter
Maxi
Maximum weight supported: 100kg
Size: 83cm internal diameter; 135cm external diameter
Cover:
100% polyamid with a zipper closure
Inner tube:
rubber and so likely to contain latex
13.
Installation
Allow plenty of unobstructed space around your swing. Suspended equipment needs a
minimum ceiling height of 2.5m (8 feet). Suspended equipment should be positioned a clear
distance of 1.8m (6 feet) from walls and obstacles.
Safety Snap
The Safety Snap included can be locked. Turn the barrel to move
it up and down and so open and close the Safety Snap. The Safety
Snap shown to the right and below is slightly different, but the
principle is the same.
Tube Swing
1.
Open the zipper of the cover and open out the cover.
2.
Place the black inner tube on the open cover as it may be easier to inflate the tube
with the cover underneath rather than trying to fit the cover onto an inflated tube.
3.
Locate the inflation valve on the black inner tube. This is a small hole (no separate
parts or protruding stem), with a circle around it to help you to find it. Insert the
needle of your pump into this hole and inflate the inner tube. Inflate the tube
gradually in an environment that is at room temperature (not a cold room). Inflate
the tube to around 80% full and then top this up gradually.
4.
Close the zip all the way around the cover. The start and end of the zipper will be at
the top of the swing.
5.
The black straps (the reinforced bands) are already attached to the cover. These
have a loop at each end of each strap – place these together and join these using the
