the next setting. The Light Column has 5 speed settings. Upon each press of the switch, the
sound sensitivity will run through levels 1 to 5, and then back to 1 again. The LED Waterless
Rainbow Tube will turn on with the speed as set in last usage.
Jack Socket:
There is a jack socket at the rear of the LED Waterless Rainbow Tube base should you wish
to add your own simple switch. Use of such a switch allows the user to change the MODE
with each button press.
DMX:
The mode can also be changed using a DMX Controller (not included). The channel numbers
are as follows:
CH1 Red
CH2 Green
CH3 Blue
CH4 Mode
14.
Care and Maintenance
All parts of the LED Waterless Rainbow Tube should be checked regularly
Store in a safe place out of direct sunlight when not in use.
Store out of reach of clients – do not allow unsupervised use.
Wipe off accidental marks/liquids using a damp cloth, avoiding excessive amounts of
water.
Do not use cleaners with abrasives in them or solvent-based cleaners such as
trichloroethane or carbon tetrachloride. Washing up liquid solutions used to wash
cups/plates etc. are ideal.
15.
Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
LED Waterless Bubble Tube 21476, 21510, 21511 July 2019
Copyright ROMPA® Ltd
