13.
Installation
Remove all packaging
Check the product to ensure that it hasn’t been damaged in transit. In the unlikely
event that any problems are found, contact ROMPA® immediately
To assemble the LED Waterless Rainbow Tube, first remove the plastic white cover
off the base by gently lifting up at all four corners:
Gently lift up the tube and place over the base, lining up the 4 screws on the base
with the four drilled holes on the square base:
Secure the tube to the base using the washers and wing nuts provided. Put a washer
on each screw first, followed by a wing nut. Twist the wing nuts to tighten:
Connect up the electric cable to the rear of the black control box:
