13.
Installation
1.
Install on a flat, stable floor. The Frame should be stored and used indoors. Make
sure your floor can comfortably support the weight of this Frame, your swing and
activity using the swing.
2.
If in any doubt about the assembly of this product, consult a suitable experienced
person for assistance. One person can assemble the Frame, but assembly is easier
for two people. The vertical spine can be self-supportive but it is always
recommended that a second person holds it steady whilst the legs are attached.
3.
Familiarise yourself with the components:
A = suspension head
B = vertical spine
C = legs
D = adjustable feet
The frame consists of 4 main tubular parts, 5 feet and a fixing set.
4.
Firstly, position the vertical spine (E) upright – it should be largely self-supporting
once vertical.
5.
Offer up the first leg (F) and secure in place using 5 x M10 x 30mm bolts (G) as
shown below. Turns screws/bolts clockwise to tighten or anti-clockwise to loosen.
6.
Repeat the process to secure the second leg to the vertical spine.
