11.
Safety
Supervise the use of this product.
Cease use of the product if it becomes damaged or ceases to work.
Make sure that the power cable is never crimped or damaged. Establish a regular
checking schedule to make sure the product and the cable are not damaged.
Should this product be dropped or damaged, unplug immediately and cease use. Do not
re-use the product before a qualified and suitably experienced electrician has confirmed
that it is safe to re-use the product.
As with all electrical items with a higher voltage, misuse could result in electric shock.
For indoor use only.
Keep this product dry and away from moisture and liquids; flammable sources; and gases.
This product can become warm after prolonged use.
Unplug after use and before any maintenance and cleaning.
Do not allow the power cable to come into contact with other cables. Handle power
cables and connections with care.
Do not remove the safety warnings and information labels from the product.
Do not stare directly into the light.
This product may not be suitable for those with photosensitive epilepsy.
This product must be earthed. If any doubt, please consult a suitably qualified person.
Ensure the available voltage does not exceed the voltage given in the specification below.
If this product has been exposed to extreme temperatures and drastic temperature
fluctuations (e.g. after transportation), do not plug this product in immediately as the
resulting condensation could damage the product. Do not plug the equipment in and
switch this on till this product has reached room temperature.
Only carry the product using the hanging/mounting bracket (never by the power cable)
Do not connect to a dimmer pack.
Do not attempt to open up or modify this product.
Do not disconnect the power supply by tugging or pulling the cord.
Do not switch the equipment on/off in short intervals as this will reduce the life of the product.
Do not view the light output with optical instruments or any device that may concentrate
the beam.
12.
Technical Specification
CE:
Risk Group 2 LED product according to EN62471
Power supply:
240V, 50Hz; IEC power input
Power consumption:
50W
Fuse:
F2A 250V
Light:
one 40W white LED
Size:
31 x 26.5 x 20cm
Weight:
4kg
Beam angle:
34°
Focus:
Manual focus
Temperature:
Fan cooled
