13.
Installation
Turn the switch back over so that the textured (knobbly) part is uppermost.
Use on a level, stable surface.
Connect the switch to your switch activated item (you may need to use an
appropriate adapter).
Press the top (the lowest part or left/right of the top) to obtain vibration and
to activate your switch activated item and to stop the vibration.
Remove the batteries if you wish to disable the vibration of the switch.
14.
Care and Maintenance
Check for client allergies before using any cleaners.
Wipe the switch clean with a damp cloth and a mild household multi-purpose cleaner or
mild disinfectant.
Do not use abrasive cleaners.
Do not submerge in water.
Change the batteries as required.
Remove exhausted batteries.
Do not dispose of batteries in fire. Do not mix old/new batteries or different types of
batteries. If the product will not be in use for long periods, remove the batteries.
Do not drop onto hard surfaces.
Store away from excessive heat, damp and direct sunlight.
In the unlikely event of product failure, try new batteries. Do not attempt to open up or
repair this product.
15.
Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com. We hope you find our
instructions invaluable. If you have any suggestions for improving them further your comments will
be greatly received – please contact us at
Vibrating Lollipop Switch 18631, September 2016
Copyright ROMPA® Ltd
