Rompa 18516, Руководство пользователя

Страница: 8 / 16

14. Care and Maintenance
To empty the bubble tube:

Disconnect the Super Interactive Switch Box (if using)

Remove the cap (lid).

Carefully holding the tube, pour the water out into a suitable place. Alternatively
the water can be siphoned out the top.

Refill the Bubble Tube as required.
General care:

Wipe the exterior of the Portable Midi Bubble Tube with a slightly soapy cloth.
Wipe excess soap away with a damp cloth.

NOTE: Never use solvent based cleaning products, methylated spirits, alcohol
wipes or liquid detergents to clean the Bubble Tube.
Recommendations (to prevent the growth of microbes in the water):

Change the water monthly

Empty the bubble tube altogether if it is not to be used for long periods

BCB Water Treatment Fluid or a suitable water sterilising tablet can be added to
the water – consult your local Health and Safety Executive for guidelines

Do not add bleach, coloured dyes or salt to the water
Once this product is eventually exhausted dispose of it responsibly
15. Troubleshooting
Problem: the Super Interactive Switch Box does not work

Is the Switch Box firmly connected? Turn the Switch Box over – is it set to
‘Bubbles On’? If it is not, set it to this.

If this suggestion does not work, it is possible that the pump has failed. Contact
ROMPA
®
for advice.
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
producthelp@rompa.com
Portable Midi Bubble Tube 18516, September 2016
Copyright ROMPA® Ltd