Rommelsbacher VAC 110, Инструкция по эксплуатации

Страница: 29 / 36

29
2. Start creating a vacuum in the container
• Press the button “Canister”.
 The pump starts evacuating.
• If the vacuum is created, the pump stops. The
appliance is in standby mode now.
• Depending on the setting, the pilot lamps “Nor-
mal” or “Soft”, respectively “Dry” or “Humid”
are still on.
• Remove the vacuum hose and close the
appliance’s upper part. (it shall not latch!)
You can stop the process at any time, by pressing
the button “Canister” again.
In order to avoid overheating, the appliance stops
automatically after two minutes, if the container
is not air tight.
3. Pull mains plug after use
Store the appliance unlocked with unlocked release buttons, otherwise the seals can be
damaged.
ATTENTION: In order to ensure a proper functioning of the appli-
ance, store it with unlocked release buttons. Otherwise the seals can
be damaged.
7 Storage of the appliance