37
Kneading dough
• The automatic programme starts with the kneading of the dough.
The display shows the selected programme permanently.
The duration of kneading process is shown at the display by a
descending time sequence.
Additionally the symbols
and
appear.
Automatic water supply
• After a short time the amount of water determined by the electronics is
automatically pumped into the kneading container via the water outlet.
The display shows symbol
.
Extruding dough
• After the kneading process is fi nished, the appliance automatically starts
with extrusion of the dough.
A rotating bar lights up in the display during the extrusion of the dough.
Additionally the symbol
appears.
Ventilation
• Shortly after beginning of dough extrusion, the fan starts to work.
The display shows symbol
.
Effi cient dough yield
• The electronics recognizes whether there is still some dough left in the
kneading container and ensures a particularly high dough yield by
repeating the kneading or extrusion process.
The last 10 seconds of the programme are shown at the display in a
descending time sequence.
Automatic stop
• After the programme has ended, the appliance stops operating automatically.
This is indicated by a 3-time acoustic signal.
The display shows
“--:--“
.
Additionally the symbol
appears.
NOTE:
If no further button is pressed within 2 minutes, the appliance
switches back to operating mode. If again no further button is pressed
within the next 2 minutes, the appliance switches back to standby mode.
Switching off the appliance
• Press button
ON/Standby
, to switch the appliance to standby mode.
