Rommelsbacher ES 850/E, Инструкция по эксплуатации

Страница: 19 / 24

19
NOTE: The appliance has a “soft-start”, i e. the appliance starts slowly and increases the speed evenly to the
level you set.
• Fill the food in the filling hole and press down with the pusher. This can be repeated according to requirements.
Make sure that you do not fill too much food in and that you do not apply too much pressure with the pusher.
The best results will be achieved if you press down the pusher slowly.
Please make sure that the vessel below the spout does not spill and that the pulp container is not too full.
• Switch the appliance off.
For switching off, turn the rotary knob to the left to the position “OFF”.
Always pull the mains plug after the extracting procedure has been finished!
Emptying the pulp container during use
When extracting larger quantities, the pulp container should be emptied regularly to ensure a trouble-free
operation of the appliance.
• Switch the appliance off – pull the mains plug!
• Remove the pulp container (see “How to disassemble your appliance”.)
• Clean the pulp container.
• Attach the pulp container (see “How to assemble your appliance”).
• Before plugging the appliance in make sure that you have not accidentally switched it on!
• Switch the appliance on and resume working.
Easing blockages of the grater during use
During use, it might happen that the pulp accumulates below the filling hole and blocks the grater. This can
happen if you process very hard and fibrous food too quickly and with too much pressure on the pusher. Then, it is
necessary to ease this blockage.
ATTENTION: Hazard of injury! The grater keeps running for
ca. 10 – 15 seconds after is has been switched off, therefore
disassemble the juicer only at standstill!
Do not grasp in the filling hole and the grater. The grater is very
sharp; handle it with care to avoid injuries!
• Switch the appliance off.
Turn rotary knob to “OFF“ position and pull the mains plug!
• Remove the top cover (see “How to disassemble your appliance”).
• Now, carefully ease the blockage in the grater with a spoon made of wood or plastic.
• Attach and lock the top cover (see “How to assemble your appliance”).
• Before plugging the appliance in make sure that you have not accidentally switched it on!
• Switch the appliance on and start working again.