17
NOTE:
If the tank is already filled with beans, the coarseness should be set at running motor. If there are
no beans in the tank or grinding block, the coarseness can be set without running motor.
Setting the coarseness
• The coarseness can be set in 12 levels.
• For setting the desired coarseness, hold the beans tank and turn
it to position 1 (fine) – 12 (coarse). Observe the marking on the
container.
Level 1 – 2: extra-fine powder
Level 3 – 4: fine powder
Level 5 – 8: medium powder
Level 9 – 12: coarse powder
Setting the powder quantity
• A powder quantity of up to 10 doses can be ground at once.
• Turn the rotary knob to the left (min. 2 doses) or to the right (max.
10 doses) to the desired position.
Switching the appliance on and off
• Connect the appliance to the mains.
Cord which is not needed can be stored in the cord take-up at the
bottom of the appliance.
• Press button “ON/OFF”.
The appliance starts the time-controlled grinding process. After the
set time has been reached, the appliance switches off automatically.
• You can interrupt the grinding process any time by pressing the
“ON/OFF” button again.
• Pull the mains plug if the appliance is not needed any more!
NOTE:
The actual powder quantity depends on the used kind of
beans, roasting and set coarseness.
Dismantling and assembling the appliance
Dismantling the appliance
• Pull the mains plug!
• Hold the powder container, press it down slightly and remove it to the front.
• Empty the beans tank. Lift the appliance and empty the tank.
• Remove the beans tank and dismantle the grinding block:
