Step 6 - Fitting Screw Cover and Cap
1. Remove the release paper from the Adhesive Tape supplied and place the Tape on the face of the Vertical
Door Frame, ensuring the Tape is positioned to one side of the screw heads.
2.
Place one side of the Cover Strip over the leg on the Vertical Frame and press firmly to stick the Cover Strip
to the Frame.
• The Cover Strip should sit on top of the tray.
3. The Top Cap has grooves and can be shortened by cutting along these grooves using scissors or snips
(adding a small amount of sealant will help keep the cap in place).
4. Place the Branding Badge in a prominent position on a none moving part of aluminium.
Cut off
here
③
①②
Cover Strip
Adhesive Tape
INSIDE
VIEW
Cover Strip to sit on top of the tray
