Rolodex RF-2034, Руководство пользователя

Страница: 5 / 6

13
USD –> YEN
RAT E
1
6. Type an exchange rate and then press ENTER.
The rate should be the units of the target currency
(the currency the arrow points to) equal to one unit
of the source currency.
To type a decimal, press P.
7. If you want, repeat Steps 2-6 to set another ex-
change rate.
To Convert Currencies
1. Press CONV until a currency conversion pair
appears.
2. Use
▼
or
▲
to select a pair.
3. Type a number.
4. Press for a forward conversion or for a
reverse conversion.
5. To clear the conversion, use ▼ or ▲ .
Metric and Currency Conversions
This organizer may change operating modes due to electrostatic dis-
charge. Normal operation of this organizer can be re-established by
pressing the RESET button, or ON and then OFF, or by removing
or replacing the battery.
14
To Enable the Lock Mode
The lock mode prevents access to the scheduler, phone
directory, and memo pad without a password. Access to
the calculator and converter is unaffected.
Warning! Your password is not retrievable from the
organizer, so always write and save it in a separate
location. If you lose or forget your password, you must
reset the organizer to use the scheduler, phone
directory, or memo pad, thereby losing all their
information. To learn more, read “To Reset the
Organizer” under “Battery Replacement.”
1. Press TIME until the clock appears.
2. Press EDIT (
).
PASSWORD?
NEW–_
3. Type a password of up to six characters and
press ENTER.
PASSWORD?
CONFIRM–_
4. Type the password again and press ENTER
to confirm it.
The key icon appearing on the left of the screen indi-
cates the lock mode is enabled.
Using Password Protection
15
To Use the Password
With lock mode enabled, the password is requested
when the scheduler, phone directory, or memo pad
is accessed for the first time in a session.
1. If not done already, enable the lock mode.
2. Press SCHEDULE, TEL, or MEMO.
PASSWORD?
_
3. Type the password and then press ENTER.
To Change the Password
1. Press TIME until the clock appears.
2. Press EDIT (
).
3. Type the password and press ENTER.
4. Type a new password and press ENTER.
5. Enter the new password again to confirm it.
To Disable the Lock Mode
Disabling the lock mode means that a password is not
required for access.
1. Press TIME until the clock appears.
2. Press EDIT (
).
3. Type the password and press ENTER.
The absent key icon shows the lock mode is disabled.
4. Press any main function key to continue.
Using Password Protection
16
To Make a Calculation
1. Press CALC.
The 123 icon indicates the calculator.
2. Type a number of up to 12 digits.
To type a decimal, press P.
3. Press O (+), I (-), U (
X
), or Y (
÷
).
4. Type another number.
To clear the most recent input, press X (
CE
). Then
type another number.
5. Press ENTER to complete your calculation.
Or press T (%) to calculate a percentage addition,
subtraction, multiplication, or division.
6. Press Z (
AC
) to clear the calculation.
To Use the Calculator Memory
1. Make a calculation as shown above or simply type
a number in the calculator.
2. Press R (
M
+) to add the number to the memory as
a positive number. Or press E (
M
-) to add it to the
memory as a negative number.
The
M on screen indicates a number is in the
memory.
3. To clear the calculation, press Z (
AC
).
4. To retrieve the memory, press W (
MR
).
5. To clear the calculator memory, press Q (
MC
).
Using the Calculator