background image

INTRODUCTION

Thank your for your purchase of the Rolls MX422 Field Mixer; Professional ENG mixer.  
Please read and review this manual carefully as it contains important information 
regarding the proper use and care of the MX422.

INSPECTION
1. Unpack and inspect the MX422 box and package.
If obvious physical damage is noticed, contact the carrier immediately to make a 
damage claim. We suggest saving the shipping carton and packing materials for safely 
transporting the unit in the future.
2. Please visit our website at www.rolls.com and click on the Register Your Warranty 
Here button, or complete the Warranty Registration Card and return it to the factory.

TABLE OF CONTENTS
Introduction 

   1

Inspection
Table of Contents
Hearing Safety Warnings
 

 

Features  

 

 

                 2

Specifi cations
Quick Start Guide 

 

 

3

Description
Front 

Panel 

   4

Rear 

Panel 

   5

Connection 

   6

Rear Panel Connections
Front Panel Connections
Operation 

   7

Schematic 

   10

HEARING SAFETY WARNINGS:

While special attention has been given to your safety and hearing protection, the operator 

determines proper and safe operating levels.

Please note the following:

- Always turn down the PHONES level control before plugging in your headphones.

- Always operate your headphones at the lowest practical level.

- Be especially cautious in unknown or widely varying environments.

1

www.rolls.com

www.rolls.com

10

SCHEMATIC

Содержание MX422







Отзывы: