Rollplay W487AC, Руководство пользователя и инструкции по сборке

Страница: 12 / 26

12
Right Rear Wheel
1. Slide the axle away from the motor so that 1 ’’ of the axle is visible on
the motor side.
2. Slide the rear wheel (4) onto the axle with the gear teeth facing inward.
Ensure that the gear teeth connect with the motor that is pre-installed
on the axle.
3. Slide the axle toward the motor until it stops against the left rear wheel.
4. Slide the washer (14) onto the axle.
5. Insert the straight side of the snap pin (12) through the hole at the end
of the axle to keep the wheel in place.
Rims and Hub Caps
1. Position the wheel rim (6) over the holes on the wheels, and snap into
place.
2. Position the hubcap (7) over the holes on the wheel rim, and snap the
hubcap into place.
6 7
Assemble the Rear Wheels