14
Assemble the Rear Wheels
1. Remove tape from both sides of the rear axle to access washers
and snap pins. Note: The right side of the vehicle will only have 1
washer
2. Slide the washer onto the left rear axle
3. Slide the left rear wheel onto the axle with the gear teeth facing
inward. Slide the right rear wheel onto the axle and ensure that
the gear teeth engage with the gear box
4. Slide a washer onto both ends of the axle
5. Insert the straight side of the snap pin (5) through the hole at the
end of the axle to keep the wheel in place
6. Position the hubcap over the holes on the wheel, and snap the
hubcap into place
Helpful Tip:
1. If you encounter
trouble fitting both
wheels onto the rear
axle, then your rear
wheel axle may need
to be realigned.
2. Remove both wheels
from the rear wheel
axle. Using two hands,
push down on the rear
wheel axle and slide
it gently toward the
side of the vehicle that
needs more room.
Gear teeth should
face inward
3
4
5
6
Содержание W420AC
Страница 4: ...This page is intentionally left blank ...
Страница 25: ...25 This page is intentionally left blank ...
Страница 27: ...This page is intentionally left blank ...
Страница 28: ......