USAGE
Read the following information before attempting to ride your Roller-Pro Trotter E-scooter.
The Roller-Pro Trotter E-scooter supports up to 90Kg. Do not carry passengers.
Only operate the Roller-Pro E-scooter where permitted. Local laws may restrict
where you may ride. Please consult your local area laws and restrictions.
The Roller-Pro Trotter E-Scooter contains a motor and may be classified as a motor
vehicle under local laws in your area. It is your responsibility to abide by any local
laws restricting how or where you may ride.
How to Ride:
Before starting to ride, make sure you are well equipped and protected. The Roller-Pro
Trotter E-Scooter is placed on a flat level surface and is fully charged. Follow the
below steps. For your safety, please read this entire section before attempting to ride.
1. Press the Power key button during 3 seconds to on your E-scooter.
Step 1:
Carefully step on with one foot and stand upright but relaxed. Grab both
handles.
Step 2.
Keep one foot on the ground and press the throttle very slowly to begin
accelerating. Use the handles to steer.
Step 3.
Start your Roller-Pro Trotter E-Scooter by pressing the power button, and
Continue accelerating by pushing the throttle.
Step 4:
To stop, release the throttle and use the handbrake, footbrake, or both to
Gradually come to a stop. Step out of the scooter by putting one leg at a time.
Press the rear mudguard for rear manual brake.
Warning: Your E-scooter integrates both electric brake and rear physical brake. The
electric brake is prior to rear brake, which is only used as auxiliary brake when electric
Power key
