CHARGING THE BATTERY
1.
Ensure the scooter is turned off before proceeding to charge the battery.
2.
Locate the charging port on the bottom part of the scooter.
3.
Use the supplied charger to connect it to the charging port and to the wall outlet.
4.
While the scooter is charging, the adaptor indicator light will turn red.
If charging for the first time, charge the scooter for at least 3 to 4 hours
before using it. Make sure the E-scooter is turned off.
Do not use any other charger than the one which is supplied with your
Trotter E-scooter. If you use any other charger, it will cause failure and
the warranty will be void.
5.
Once the scooter is fully charged, the adaptor indicator light will turn green.
Disconnect the AC charger from the port and the wall outlet.
IMPORTANT NOTES ABOUT CHARGING
If the green light on your charger does not turn RED when you plug it into your scooter, it could
mean you have to check the cables to ensure you have a proper con
nection; or that your scooter
is already fully charged. Push and hold your power button next to the charging port to check the
status of your battery in the display.
Do not overcharge, as this will affect the life of the battery.
Do not, under any circumstances, use the E-scooter while it is connected to the charger.
To maximize the battery life, charge it once every 20 days or even once a week especially
after riding. This process is very important for the battery to keep running.
Charge preferably in places away from flammable products.
Monitor and control the charging process (Do not exceed the recommended charging time).
Do not charge your E-scooter at night while you are sleeping.
If your E-scooter has been exposed to High or Low temperatures, wait until it has reached
its normal temperature before charging.
