Picture H
Right upright
A. Remove the protective film from the right
upright.
Unscrew the protective screw, put the mirror in
the slide of the upright and fix again the screw
as well as the back screw B (Picture F on page
2).
Attention: Both wires should be outside (Picture
I)
At this stage, the mirror is at its place but must
be hold.
5.Mounting of the top parts
A. Mounting of the roof
Remove the protective film from the roof and put
the roof on both uprights. (Picture J)
B. Mounting of the top shelf
Place the shelf on the roof with both plastic sha-
ped parts up. (Picture K)
Fix the screws A (Picture F on page 2).
Picture J
Picture I
Picture K
c) Use of device :
Elements of command and display
Starting
Refrigerated part (left container)
Press on the switch (n°3 on picture), the machine is on. The preset electronic
thermostat (n°1 on picture) flashes and displays the temperature.
Wait until the salad’bar is at the right temperature
Warming part (right container)
Press on the switch (n°5 on picture), the green pilot light (n°2 on picture) ignites.
Turn on the thermostat (n°6 on picture) on the desired position.
Press on the switch (n°4 on picture) to turn on light.
Temperature setting
Refrigerated part (left container)
The electronic thermostat (n°1 on picture) is preset in factory. It can be adjusted if
necessary. To modify the temperature, press the "set" key for 5 seconds: the pro-
grammed value is displayed and the LED flashes. Use the arrows to adjust your
temperature and then valid by pushing on set.
Warming part (right container)
Set the temperature by positioning the thermostat (n°6 on picture) to the desired
temperature.
Stopping the appliance
- Set each switch (n°3, 4 and 5 on picture) on 0: the appliance is no longer func-
tioning.
- Let the device cool
5
Command/Display
Function
Refrigerated part (left container)
Electronic thermostat (n°1 on pic-
ture)
Temperature setting
Switch I/0 (n°3 on picture)
On/off
Warming part (right container)
Green pilot light (n°2 on picture)
Machine on (pilot light on)
Machine off (pilot light off)
Switch I/0 (n°5 on picture)
On/off
Thermostat (n°6 on picture)
Temperature setting
Switch I/0 (n°4 on picture)
Light on / Light off
